Normond C & E Series Analogue Gauges

The Normond series of analogue gauges are popular choices for commercial sites.  The gauges do not require any power and feature a hand pump mechanism.  This makes them ideally suited for hazardous environments.

Technical Information – Normond C & E Series

The Normond C and E series of analogue gauges operate on the hydrostatic principle with a hand pump, which means that no power supply is needed. The pump displaces the liquid from the balance chamber, resulting in back pressure which is detected by the gauge and displayed on the dial.

The C series gauge shows a reading in volume, weight, or height, whereas the E series gauge displays how full the tank is as a % reading. Customers can normally self-install both gauges.

Gauges C & E Series are supplied with a standard balance chamber, ‘BCKIT’ which is complete with 10 metres of PVC connection tube and brass weight.

Please note: The chambers no longer come in copper, but are supplied in brass.

Maintenance, Calibration and Testing Services

The C series is individually calibrated to the size of the tank and to satisfy customer requirements. The gauges can be recalibrated if required and calibration certificates are supplied with each gauge.

The E series gauges are self-calibrated on site. Each gauge is supplied with a one year warranty.

Please Note:
The gauges are not compatible with vapour recovery systems.

 

Normond C Series Analogue Gauge

The C series is a simple gauge that gives a dial reading in volume, weight, or height and is suitable for tanks up to 9 metres high.

  • For fuel oils and other liquids
  • Suitable for hazardous environments
  • Caters for tanks with difficult access
  • Large format dials for easy reading
  • Weather-resistant
  • Minimal maintenance
  • Simple to install
  • Highly reliable with thousands installed

Normond E Series Analogue Gauge

The E series gauge gives a % full reading and is suitable for tanks up to 9.2m high. These gauges are robust, weather-resistant, and can be relied upon to consistently perform for many years with little maintenance. The E Series Gauge is also self-calibrated so can be purchased in bulk and kept in stock by potential distributors for an immediate lead time to the customer.

  • For fuel oils and other liquids
  • Suitable for hazardous environments
  • Caters for tanks with difficult access
  • Large format dials for easy reading
  • Weather-resistant
  • Minimal maintenance
  • Simple to install
  • Highly reliable with thousands installed

Technical Information – Normond G Series

The Normond G series analogue gauge operates on the hydrostatic principle with a hand-pump, which means no power supply is required.  The pump displaces the liquid from the balance chamber, resulting in back pressure which is detected by the gauge and displayed on the dial as volume, weight, or depth. Customers can normally self-install the gauges.

Please note: The G Series does not come with a ‘BCKIT’.

Normond G Series Analogue Gauge

The G series are very accurate and is suitable for most liquids (excluding foods). These gauges are robust, weather-resistant, and can be relied upon to consistently perform for many years with little maintenance.

  • For most liquids including fuel and chemicals
  • Suitable for hazardous environments
  • Caters for tanks with difficult access and
  • up to 10m high
  • Large format dials for easy reading
  • Weather-resistant
  • Repair and recalibration service
  • Simple to install
  • Highly reliable with thousands installed
TSG tank cleaning

Dip-Rods

Accurately calibrated GRP diprods for stationary tanks are available from TSG Fleet.  Dip-rods are manufactured at TSG Fleet using tank data supplied by the tank manufacturer or customer as the original reference. These durable and easy to read dip-sticks are the “yard stick” which can be used in the event of tank gauging problems or discrepancies.

The glass fibre dip-rods are easy to handle and do not bend or break. Being light they can be repeatedly used without the risk of penetrating the bottom of the tank. We also provide a specialised service to road tanker manufactures and can manufacture calibrated diprods for use with road tankers.

Key points:

  • For most liquids including fuel and chemicals
  • Suitable for hazardous environments
  • Caters for tanks with difficult access and up to 3.1 m high
  • Clearly Engraved for easy reading
  • Weather-resistant
  • Can provide blank rods if required
  • Simple to install
  • Highly reliable with thousands installed

Calibrated Gauge: Request a Quote

If you would like a no-obligation quotation for a calibrated C or G gauge then simply complete our Tank Questionnaire form below and email to enquiries.uk@tsg-solutions.com

TQGAUGES2018 Gauges Questionaire

If you would like a no-obligation quotation for a GRP Diprod then simply complete our Questionnaire form below and email to enquiries.uk@tsg-solutions.com

TQ DIPRODS BLANK 2018 Questionare

 

You are using an outdated browser . Please upgrade your browser to improve your experience.

To upgrade your browser we refer you to:

browsehappy.com Close